Products Show 产品展示

MFZ9 (B)-YC DC hydraulic solenoids using screw thread

MFJ9 (B)-YC AC hydraulic solenoids using screw thread



Application:

AC、DC wet-type solenoid for valves are respectively used in power control line of AC power with AC 50-60Hz, voltage up to 220V and of DC power with voltage up to 220V and are used as power units of threaded type back pressure controlled valves.

*MFB9-YC series are suitable to be introduced when AC voltage up to 220V.

Specifications

parameters\type MFZ9-22YC MFZ9(B9)-37YC MFZ9(B9)-90YC MFJ9-27YC MFJ9-54YC
Rated force(N) 22 37 90 27 54
Rated stroke(mm) 2.8(3) 2.8(3) 3.6(4) 2.8(3) 3.6(4)
Full travel(mm) ≥6.5 ≥6.5 ≥8.5 ≥6.5 ≥8.5
Rated voltage(V) DC6-220V,AC110-380V
Endurable oil pressure(MPa) Magnetic housing all can endure oil pressure of 21MPa
Consumption Power(W) ≤30 ≤30 ≤40 ≤26 ≤40
Insulation grade F级
Joint screw thread M20×1 M20×1 M26×1.5 M20×1 M26×1.5

 

type\dims Amax Hmax Bmax d1 d2 d3 d4 d5 L1 L2 L3 L4 L5
MFZ9-22YC 35 74 43.2 Ф5 Ф8.7 Ф15 Ф16.8 M20×1 13.2 8.4 3.6 2.8 12.4±0.1
MFZ9-37YC 44 74 52 Ф5 Ф8.7 Ф15 Ф16.8 M20×1 13.2 8.4 3.6 2.8 6.5±0.1
MFZ9-90YC 69 110 75.6 Ф8.7 Ф18 Ф21.4 Ф23 M26×1.5 12.7 10 3.1 3 5.6±0.1
MFJ9-27YC 44 74 52 Ф5 Ф8.7 Ф15 Ф16.8 M20×1 13.2

8.4

3.6 2.8 6.5±0.1
MFJ9-54YC 69 72.5 75.6 Ф8.7 Ф18 Ф21.4 Ф23 M26×1.5 12.7 10 3.1 3 5.6±0.1

External Shape and Installing Dimension

Note: 

Hydraulic solenoid adopts plug bases meeting the requirements of the ISO4000 or DIN43650 standard. The user can choose at his needs between the two specifications, including plug base with indicator light and plug base without indicator light. The voltage specification of the plug base with indicator light should conform to the voltage specification of the solenoid itself.

The manual jogger of the solenoid should be controlled by hand only in the debugging or critical situation. However, when the backing pressure of the system is pretty high and difficult to adjust, the user should use the cross head driver to slowly push the manual jogger instead of using impact force so as to avoid destroying the manual jogger and the surface of the direction hole which will cause the solenoid to leak the oil and unable to reset.

When the solenoid is used Bi-direction, it should be insured that the two solenoid cannot be electrified at the same time so as to avoid the malfunction of the solenoid.

Overcurrent protection system should be used in the connection part between electric control system and solenoid so as avoid burning the solenoid and electronic control units under improper condition.


Explanation Of Sample:

●If client have special requirements,we can adjust the connect dimension,the extended length of push pin,and the supply voltage between solenoids and valve body.

●Characteristic curve for reference only.

●If the application is beyond the catalogue,please contact with us.

●The main performance parameter is obtained in the conditions of lab.Finally explanation and changing of the parameters by Tonly.