Products Show 产品展示

MFJ8-YC AC solenoids for hydraulic valves

MFZ8-YC DC solenoids for hydraulic valves

VICKERS SERIES



Application:
this series solenoid is applicable to be used in AC circuit and DC circuit with one-way 50HZ and a voltage no more than 220V It can be applied with American VICKERS series solenoid valve.

Specifications

parameters\type

MFJ8-27YC

MFJ8-54YC

MFZ8-37YC

MFZ8-90YC

Rated Force(N)

≥27

≥54

≥37

≥90

Rated Stroke(mm)

3

4

3

4

Full Stroke(mm)

≥6

≥8.5

≥6.5

≥8.5

Operating frequency(T/h)

12000

12000

7200

7200

Rated voltage(V)

110-220

110-220

12V-24V

12V-24V

Endurable oil pressure(MPa)

21

21

21

21

Power ratio(%)

100

100

100

100

 

External Shape and Installing Dimension

Note: 

Hydraulic solenoid adopts plug bases meeting the requirements of the ISO4000 or DIN43650 standard. The user can choose at his needs between the two specifications, including plug base with indicator light and plug base without indicator light. The voltage specification of the plug base with indicator light should conform to the voltage specification of the solenoid itself.

The manual jogger of the solenoid should be controlled by hand only in the debugging or critical situation. However, when the backing pressure of the system is pretty high and difficult to adjust, the user should use the cross head driver to slowly push the manual jogger instead of using impact force so as to avoid destroying the manual jogger and the surface of the direction hole which will cause the solenoid to leak the oil and unable to reset.

When the solenoid is used Bi-direction, it should be insured that the two solenoid cannot be electrified at the same time so as to avoid the malfunction of the solenoid.

Overcurrent protection system should be used in the connection part between electric control system and solenoid so as avoid burning the solenoid and electronic control units under improper condition.

 

Explanation Of Sample:

If client have special requirements,we can adjust the connect dimension,the extended length of push pin,and the supply voltage between solenoids and valve body.

Characteristic curve for reference only.

If the application is beyond the catalogue,please contact with us.

The main performance parameter is obtained in the conditions of lab.Finally explanation and changing of the parameters by Tonly.